$573.75

In stock, ready to Ship!

Last ordered:

Last ordered:

Change quantity
Add
Other products by General Finishes

General Finishes Enduro Clear Poly 

Now Available in DEAD FLAT Sheen!

General Finishes Enduro Clear Poly is a high solids, optically clear finish well suited to spraying applications requiring a durable & non-yellowing topcoat.
 

Clear Poly is a high solids, quick drying finish that can be used directly on bare wood or on stained surfaces. 

 

Non-Yellowing properties of Clear Poly makes it an excellent choice for a protective clear coat over painted or tinted poly surfaces such as MDF or paint grade cabinetry.

 

Enduro Clear Poly is self-sealing but can also be used with General Finishes Sanding Sealer if desired.

Exceptional durability and chemical resistance makes this an excellent choice for most residential and commercial applications.  
 

  • LEED EQ4.1, EQ4.2, EQ4.5
  • Non-Flammable
  • Low Odour
  • High Solids (29%)
  • Optically Clear, Non-Amber
  • Non-Yellowing
  • Water Clean-Up
  • Quick Drying for Sanding and Re-Coating
  • Excellent Chemical & Abrasion Resistance
  • Spray Application Recommended (HVLP or Conventional)
  • Tintable with ColorFX Dyes, Mixol Pigments or UTCs

General Finishes Clear Poly

Click Below for Product Data:


Applications:
  • Kitchen Cabinets
    • Natural or Stained Wood
  • Residential Casegoods
    • Entertainment Units & Built-ins
    • Casual Use Furniture
    • Book Cases
    • Custom Furniture
  • Commercial Casegoods
    • Display Cases
    • Millwork & Trim
    • Passage Doors
  • Interior Millwork & Trim
    • Railings
    • Mouldings
    • Baseboards
    • Panelling
    • Passage Ways

 

 

 

 

(2)
Average rating 10 out of 10 ( based on 2 reviews )

Love This Finish

Review by Mark on 9/12/2015

Switched from pre-cat to the clear poly and really like the results. I use it on smaller and larger furniture items and carved panels. Levels well and leaves a smooth extremely durable finish.

Excellent top coat

Review by Eric on 5/20/2015

I used it on bare wood and over stained wood with spray equipment. Gives a very clear and hard finish. The clarity is good on dark stained woods but can sometimes show a slight bluish haze when covered over very dark stains. It is easy to sand and if you wait more than a couple of hours before sanding, there should be minimal cloging of sanding paper. (Wood Essence Adds: Bluish haze can sometimes occur on heavy coats, but should dissipate once fully cured)

Write a Review