$61.50

In stock, ready to Ship!

Last ordered:

Last ordered:

Change quantity
Add

$157.50

In stock, ready to Ship!

Last ordered:

Last ordered:

Change quantity
Add

$157.50

In stock, ready to Ship!

Last ordered:

Last ordered:

Change quantity
Add

$157.50

In stock, ready to Ship!

Last ordered:

Last ordered:

Change quantity
Add

$126.00

In stock, ready to Ship!

Last ordered:

Last ordered:

Change quantity
Add

$49.50

In stock, ready to Ship!

Last ordered:

Last ordered:

Change quantity
Add
Other products by General Finishes

General Finishes Enduro Pigmented Polyurethane

 

General Finishes Enduro Pigmented Polyurethane is a durable finish that can be used as a final color coat on cabinetry and other projects where an opaque finish is required.
 

Available in Black or White Satin Sheen, the White Poly can be tinted to various off-white colors such as Benjamin Moore Cloud White.  Please contact us for information about tinted products.

 

  • LEED EQ4.1, EQ4.2, EQ4.5
  • Non-Flammable
  • Low Odour
  • High Solids (40%)
  • Quick Build
  • Available in Black, White or Custom Tinted
  • Water Clean-Up
  • Quick Drying for Sanding and Re-Coating
  • Excellent Chemical & Abrasion Resistance
  • Designed for Spray Application (HVLP or Conventional)
  • Tintable with Mixol Pigments or UTCs
  • Coverage approximately 400 square feet per gallon (per coat).

General Finishes Pigmented Polyurethane

Click Below for Product Data:

Applications:
  • Kitchen Cabinets
    • MDF or Paint Grade
  • Residential Casegoods
    • Entertainment Units & Built-ins
    • Casual Use Furniture
    • Book Cases
    • Custom Furniture
  • Commercial Casegoods
    • Display Cases
    • Millwork & Trim
    • Passage Doors
  • Interior Millwork & Trim
    • Railings
    • Mouldings
    • Baseboards
    • Panelling
    • Passage Ways

 

 

 

 

(1)
Average rating 10 out of 10 ( based on 1 review )

General Enduro white poly

Review by Tyler on 7/24/2018

I have used this product multiple times with a Fuji Q5 (5 stage) HVLP system and T70 gun (with a 1.0mm or 1.3mm needle) and it generates excellent results. It dries quickly, sands well and after full cure it is an extremely hard finish.

Write a Review