Sames - Kremlin

Airmix Tip Unclogging Needles

$33.75
Airmix® Tip Unclogging Needles OEM Kremlin Airmix unclogging needles for cleaning clogged Airmix spray tip orifices and restoring consistent spray patterns. Helps remove obstructions and dried coa...
  • SKU: SA000-094-

Tip Size

Small for 06-09 Tips (6 Pack)
MPN: 000-094-000
In Stock and Ready to Ship
$33.75 Each
Large for 09 Tips and Larger (6 Pack)
MPN: 000-094-002
In Stock and Ready to Ship
$33.75 Each
In Stock & Ready To Ship!
Current Stock:Only left:
Description

Airmix® Tip Unclogging Needles

OEM Kremlin Airmix unclogging needles for cleaning clogged Airmix spray tip orifices and restoring consistent spray patterns.

Helps remove obstructions and dried coating buildup to reduce downtime and keep spray tips performing at their best.

Available in two sizes.

  • Choose Small for tip sizes 06 to 09
  • Choose Large for tip sizes 09 and larger

 

How to Maintain Airmix Tips:

  • Engage Spray Gun trigger safety lock and relieve system pressure before disassembling or removing the spray tip.  Injection of fluid under your skin is a VERY SERIOUS INJURY requiring urgent medical attention. NEVER spray toward your body.
  • Wipe tip with a solvent soaked cloth between spraying to prevent build-up of dried finish.
  • Work over a table with soft cloth or cardboard as a working surface to avoid dropping tips on a floor or hard surface that can chip or damage the carbide tip.
  • Once tip is removed, use a soft bristle brush with appropriate solvent to remove dried finish from tip.  Never use metal/wire brushes as they can damage the delicate carbide tip.
  • Tips can be left to soak in solvent for extended periods to soften dried finish or for long term storage.  NOTE: Tip Seals or Screens may become damaged with extended solvent soak...remove them first for long term storage.
  • Only use Unclogging Needles as a last resort to remove dried or stuck particles from the tip.
  • Do not "ream" the tip orifice with the Unclogging Needle.  Use the needle gently to push obstruction out and then try to flush with solvent through the spray gun.
  • Ultrasonic cleaners can be helpful to remove dried finish.  Situate the tip in the ultrasonic bath to prevent the tip from vibrating on metal surfaces or grates inside the tank.   Placing the tip into a plastic bowl inside the tank can help.